Tender Angel

Tender Angel

This was made with the beautiful kit Tenderness of Pink 

from Zlata Designs. It can be purchased at Scrappin Naturally HERE 

Art of Dave Nestler can be puchased HERE
Unfortunately I did not write a tutorial for this tag. My grandson was over and took very ill and I had to tend to his needs until he went home. :o(

xo Desert xo

Steampunk Blues

Steampunk Blues

Beautiful kit of Heppy of HF-Projekte at Scrappin Naturally called Vintage Steampunk Rust 

can be purchased  HERE

Art of Jennifer Janesko can be purchased HERE

Projekte New Year 2012

Projekte New Year 2012

This tag is made with the nice kit of HF-Projekte HNY 2012

and can be purchased at Scrappin Naturally HERE

Art of Keith Garvey can be purchased HERE

Sleigh Ride For Christmas

Sleigh Ride For Christmas

This tutorial was written by myself 12/18/11 for this blog, Desert's Place

Any resemblance to any other tutorials is purley concindental.

I am using a FTU kit Holly Jolly from Smdigidesigns you can find it HERE

Thank you for sharing your talents with us.

The tube I chose is from Elias Chatzoudis and can be purchased HERE

Open new image 600x600 check transparent background

Open sm_e_lights 1 resize 10 rotate right

Open sm_e_christmas tree resize 30% copy and paste as new layer to the left side.

Open sm_e_sleigh resize 50% copy and paste as new layer on to the right side

Open your tube, resize if necessary, place on the sleigh so

it looks like it is sitting in it, erase any parts overhaning.

Open sm_e_ribbon 2 resize 12%, copy and paste as new layer bottom of the sleigh to the left

Open sm_e_riggon resize 10% copy and paste as new layer bottom of the sleigh to the left

Open sm_e_ornament trio 5 resize 5%, copy and paste as new layer on the back of the sleigh.

Open sm_e_candy 1 resize 10%, image, mirror, copy and paste to the right over the sleigh.

Open sm_e_candycane resize 10% , image, mirror copy and paste on the right over the sleigh

Open sm_e_lights 2 resize 10%, rotate right, copy and paste as new layer at the bottom.

Open sm_e_lantern, resize 20%, copy and paste as new layer lower right side

Open sm_e_poinsettia1,resize 10%, copy and paste as new layer at the bottom of the lantern.

Open sm_e_poinsettia2 resize 5%, copy and paste as new layer at the bottom of the latern, overlapping the other.

Merge all layers and save, add your credits and name! I used the Alienskin Impact Gradient glow on my name.

Thank you for trying my tutorial.

xo Desert xo

Silver Memories

Silver Memories

Beautiful kit Silver Bells by TootyPup

can be purchased HERE

Artist tubes from Barbara Jensen

can be purchased HERE

Merry Christmas

xo Desert xo

Designer call at Scrappin Naturally

I thought I would post this on my blog in support of Scrappin Naturally. They can

be found HERE.

They are a wonderful bunch of creators that are looking for more to join.

See ad for details or email ScrappinNaturally@aol.com

xo Desert xo

Steampunk Wonderworld

Steampunk Wonderworld

This tutorial was written by myself 12/15/11 for this blog, Desert's Place

Any resemblance to any other tutorials is purley concindental.

THe kit I am using is the beautiful PTU Steampunk Wonderworld by HF-Projekte and can be

purchased at Scrappin Naturally HERE

The tube I used is the art of Keith Garvey and can be purchased HERE

Open new image 600 x 600

Open PHF_Red_Dreamworld_29, resize 20% copy and paste as new layer lower left corner, using the pick tool

rotate slightly to the right.

Open PHF_Red_Dreamworld_20, resize 50 %, copy and paste as new layer over the top of previous layer.

Open PHF_Red_Dreamworld_19, resize 50%, copy and paste as new layer to the right of the previous layer.

Open PHF_Red_Dreamworld_10, resize 30%, copy and paste as new layer place over to the right,

goto layers, duplicate, and put it next to the previous layer

Open PHF_Red_Dreamworld_26, resize 50%, copy and paste as new layer in the center.

Open PHF_Red_Dreamworld_17, resize 30%, copy and paste as new layer on the right side.

.Open and resize your tube if necessary, copy and paste as new layer on the right center of the rectangles.

Open PHF_Red_Dreamworld_3 20

Open PHF_Red_Dreamworld_18 resize 15 % copy and paste as new layer at bottom of tube, using the pick tool,

rotate slightly to the right.

Open PHF_Red_Dreamworld_31 7 resize 5%, copy and paste lower edge of tube.

Add drop shadows to all layers my settings are V1,H0, O100, B2, Color black

Layers, merge, merge visible.

Add copyright info and save.

Thank you for trying my tutorial!

xo Desert xo

Icy Beige Cowgirl

ICY BEIGE COWGIRL

This tutorial was written by myself 12/11/11 for this blog, Desert's Place

Any resemblance to any other tutorials is purley concindental.

Icy Beigh Cowgirl was made with the beautiful Icy Beige kit from MandogScraps,

you can purchase it at Scrappin Naturally HERE.

The tube is the art of Jose Cano and can be purchased at

PSP Tubes Emporium HERE

Let's begin.

Open new image 600x600 click transparent background.

Open MandogScraps icybeige_deco2 resize 50%.

Copy and paste as new layer near bottom edge

Open icybeige note 2 resize 40% copy and paste as new layer in middle

Open icy beige ribbon resize 30% copy and paste as new layer,

image mirror, place top right on the note, erase any parts you do not want

Open icy beige note, resize 20%, copy and paste as new layer, use the pick tool

and rotate slightly to the left.

Open icy beige note 3 resize 30% copy and paste as new layer.

Open icy beige ribbon 3 resize 30% copy and paste as new layer on the

left side of the blue note.

Open your tube, resize if needed, copy and paste on the right side.'

Open icy beige ribbon 2, resize 20%, image mirror, using the pick tool

rotate to the right. Erase any part hanging over you do not want.

Open icy beige ribbon5, resize 20%,copy and paste as new layer,

using the pick tool rotate it to the left. Erase any parts over hanging.

Open icy beige swirl 4, resize 10%, copy and paste as new layer, if it is to big still use the pick

tool and bring it in some to fit to your liking. Place in the center of the ribbons.

Open icy beige swirl 2, resize 10%, copy and paste as new layer, if it is to big still use the pick

tool and bring it in some to fit to your liking. Place to the left of the other swirl.

Open icy beige flower, resize 5%, copy and paste as new layer on the ribbons where they

come together.

Open icy beige swirl3,resize 10%, copy and paste as new layer on the right corner of the

dark brown note.

Open icy beige clip, resize 15%, copy and paste on the top corner of the dark brown note

using the pick tool rotate slightly to the right.

Open icy beige leaves3, resize 15%, copy and paste lower left, using the pick tool rotate it

slightly to the left. Copy again and paste as new layer lower on the left, using the pick tool

rotate it to the left more than the last one.

Open icy beige flower, resize 20%, copy and paste as new layer over the leaves.

Apply drop shadows to all layers except the icy beige deco2.

My settings aerr V 1, H 0, O 100, B 2.00 Color Black.

Thank you for trying my tutorial.

xo Desert xo

Time to Burlesque

Time to Burlesque

This beautiful kit is Burlesque by Lins_Creations and can be purchased HERE

I am using the fantastic art of Olivia. She has left CDO and I am unsure where to purchase her tubes.

This tutorial was written on 12/4/11 by myself, for this blog, Desert's Place.

Any likeness to any other tag or tut are purely coincidental.

Open a new image, 600x600, transparent background checked.

Open element 40, resize 15% Copy and paste as new layer.

Click inside of frame with magic wand, selections modify, expand 3, click ok

Keeping that selected, go to layers, add new raster layer

Click on foreground color in the materials pallet and select a color from frame or tube (I used black)

Click on background color in the materials pallet snd select a different color form frame or tube. (I used red)

Click on the color box again in the materials pallet and select the gradient tab with these settings

angle 45 repeats2 , style is the first choice, click ok

Using the flood fill tool, fill in this selection then go to selections, select none

drag this layer under the frame layer. Selections Select none.

Drag gradient layer under frame.

Open your tube (resize if necessary) copy and paste as new layer. Arrange the tube to your liking

on the right side. Drag under the frame layer. Erase any parts hanging over the frame. Lower the opacity 50%

Click back on the frame layer.

Open element60 resize 20 copy and paste above frame layer.

Open element 86, resize 18%. Copy and paste as new layer on the bottom of the frame. V-0, H-0, Opacity 100, Blur 2 color black. Click ok.

Open your tube, resize if necessary, copy and paste as new layer on the left of tag over the feather layer.

Open element 28, resize 20% copy and paste on left side, over the tube layer. I have mine so it looks like it is wrapped

around my tube.

Open element 53, resize 11%, paste as new layer lower left side, use the pick tool to rotate it slightly to the right.

Open element 83, resize 9%. Copy and paste as new layer top right side of frame.

Open element 68, resize 30% copy and paste top right side of frame

Open element 67, resize 20% copy and paste top right side of frame covering the handle of element 68 layer.

Open element 55 resize 10%, copy and paste as new layer, lower right side bottom of frame. Go to adjust, hue saturation, colorize

my settings are Hue 0, saturation 233. I used the pick tool and pulled it out on the right side slightly.

Open element 5, resize 12%. Copy and paste as new layer.

Open element 50, resize 15%. Copy and paste on right side, so it looks like it is setting on the flower petals.

Open element 17 resize 15%. Copy and paste on lower left side.

Open element 16, resize 10%, copy and paste on lower left side over the heart layer.

Go to layers, merge, merge visible and save.Add your credits and you are finished.

I hope you enjoyed doing my tutorial. Thank you!

xo Desert xo

PTU Christmas Countdown

PTU Christmas Countdown

This tutorial was written by myself 11/27/11 for this blog, Desert's Place

Any resemblance to any other tutorials is purley coincidental.

This tag was made with the beautiful lit Blue Star by Barbie and can be purchased at Scrappin Naturally

Artist tube is the work of Barbara Jensen you can purchase HERE

Here we go,

Open new image 600x600 transperent background checked

Open ACC_Blue Beads copy and paste as new layer

Open ACC_Berries resize 90% copy and paste as new layer on right side

Open ACC_Frame 2 copy and paste as new layer in the center

Using the magic wand tool, click inside the frame, go to selections, modify, expand 3

Open ACC_Paper 4 copy and paste as new layer, go to selections, invert and hit delete

on the keyboard, drag this layer under the frame layer. Selections select none.

Open your tube, resize if needed copy and paste as new layer. Chose how you want it to be.

Now adding the decorations

Click on the frame layer

Open ACC_Ribbon 1 copy and paste as new layer place on the lower part of the frame

Open ACC_Ribbon 2 copy and paste as new layer just over Ribbon 1

Open ACC_Blue Star bow resize 40% copy and paste as new layer top center of frame

Open ACC_Stocking resize 60% copy and paste as new layer lower right side over the ribbons ( I used the pick tool,

mode setting perspective and pulled it out a little bit to make it look flat)

Open ACC_Calendar resize 50% copy and paste as new layer middle left side of frame

Open ACC_Blue Candle 2 resize 40% copy and paste lower left corner

Open ACC_Blue Candle resize 20% copy and paste lower left corner over lapping the other candle

Open ACC_Silver heart resize 20% copy and paste as new layer on the green under the ribbons.

Feel free to use a mask layer and drop shadows at your choice.

Add your credits, then layers, merge visible and save.

Thank you for trying my tutorial, I hope you enjoyed!

xo Desert xo

FTU Forever in this life

FTU Forever in this life.

This tutorial was written by myself 11/26/11 for this blog, Desert's Place

Any resemblance to any other tutorials is purley coincidental.

Isle Esme Blogtrain Freebie from TootyPup Here

WCL MASK 64 HERE

Bethany tube from Keith Garvey Here

VM Natural Filter, Sparkle

Open new image 600x600 transparent background checked

Open TP_Paper07 copy and paste as new layer

Open WCL Mask 64 click back paper layer of new image.

Goto layers, new mask layer, from image. Use the drop down to find WCL Mask 64, Source luminance checked.

Apply. Click on layers, merge group.

Open TP_CameoFrame 02 resize 40% copy and paste as new layer.

Using the magic wand, click inside of the frame, goto selections, modify, expand 2 and apply

Open TP_Paper 07 resize 40% copy and paste as new layer, click on the paper layer and move it slightly to the right

selections, invert and hit the delete key on the keyboard. Select none.

Drag this paper layer down under the frame. With the paper layer still selected,

goto Effects, plugins, VM Natural,Sparkle with these settings: Max size 22, Red 255, Green 255, Blue 255

Rnd Color on/off 255, random seed 142 click ok.

Copy and paste your tube as new layer, position in the frame where you like it.

Open TP_Statue04 and resize 50%, copy and paste as new layer on the right side of frame.

Open TP_Flower06, resize 20% copy and paste as new layer at bottom of statue.

Open TP_Feather03, resize 30%,copy and paste as new layer over the blue flower.

Add the sparkle effects again using the same procedure

and settings listed above

Open TP_Flower04, resize 10%, copy and paste as new layer over the feather.

Add the sparkle effects again using the same procedure and settings as above.

Layers, new raster layer. Add any text you wish.

I added mine with Passions Conflict Rob, and PC Rebecca Brush.

Layers, merge visible. Add your credits and save.

I hope you enjoyed doing my tutorial

xo Desert xo

PTU Christmas Time

Christmas Time

This tutorial was written by myself 11/19/11 for this blog, Desert's Place

Any resemblance to any other tutorials is purley coincidental.

The kit I am using is PTU Vintage Christmas from Tooty Pup Scraps, you can purchase

it at Twilight Scraps HERE

The tube I am using is by Amy Brown, you can get from CDO HERE

Plugin needed Xero Fritillary

Alien Skin EyeCandy 5 Impact Gradient Glow (Optional)

Font I used is Passions ConflictROB

Let's Start

Open new image 600x600 transparent box checked

Open TP_SteamPunkChristmas Deco_6 resize 50%, image rotate right place in center and to the right.

Layers, duplicate,image, mirror, image and flip.

Open TP_bronze gear04 resize 75%

With the magic wand click inside the gear layer, goto selections, modify, expand 3 ok.

Open paper_09 copy and paste as new layer,selections, invert and hit the delete key. Pull that layer under the gear layer.

With the paper layer still active (or click on it) , go to effects, plugins, xero, fritillary with these settings

granularity 5, aggression, 36, tesselaton 10 variation 18 or you can hit random at the bottom and chose what you like.

Click back on the gear layer

open TP_Steampunk Christmas bow 4 resize 50% copy and place as new layer in the middle left side of gear

Open TP_Steampunk Christmas Lantern01 resize 20% copy and paste as new layer middle right side on gear

Open TP_ Clock 06 resize 50% copy and paste as new layer. Place top middle of gear

Open TP_Tag 04 resize 20%, image, free rotate check left, 45 free check

Open TP_Holly 04 resize 20% copy and paste near the bottom of the TP_Tag04.

Open your tube andcopy on the paper layer of the frame and paste your tube as new layer, to resize, use the pick tool.

Now this next part I may lose you on because I am unsure of how to explain it but I will try. If you have an easier way to do this

that is fine :) Whichever you feel better with

Click on the tube layer, then layers, duplicate. Drag this layer down under the frame layer and close it off. Click on the original tube layer and

erase any parts of it that may be sticking out where you dont want them to (like the wings were on my tube at the top) ( I wanted her leg sticking out so

I did not erase that part. Once this is done, click on the closed tube layer and reopen it

erase any parts you do not want, ( I erased the peices that were over the flowers deco but kept the leg again...

It takes a little practice but once you get use to it its easy. (If this doesnt make much sense just place your tube how you

want her to be lol)

Add drop shadow to all layers except the tube and paper layer. My settings are V1 ,H2 ,O67, B 5.00

Layers, merge all visible, if you are happy with it then add your credits and save.

I added a gradient glow to the name which is optional.

Thank you for trying my tutorial, I hope you enjoyed it.

xo Desert xo

PTU Candee Christmas

PTU Candee Christmas

This tutorial was written by myself 11/23/11 for this blog, Desert's Place

Any resemblance to any other tutorials is purley concindental.

Supplies needed

PTU Kit Lil Miss Candee Cane by Designed by Stina available HERE

Tube is from Barbara Jensen available HERE

WSL Mask 314 available HERE

Alienskin Eyecandy 5 Impact Gradient Glow

Font I used is TheNautiGal

Open new image 600x700 check transparent box

Open paperDBS_28 copy and paste as new layer

Layers, new mask layer,from image, use the dropdown to find mask name and apply.

layers, merge group.

Open DBS_Candypole and resize 30%, copy and paste as new layer lower right of mask

Open DBS_candyhouse1 and resize 20%, copy and paste as new layer in middle of mask layer

Open DBS_candycane 01 and resize 50%, copy and paste as new layer, image mirror place right hand

side

Open your tube, resize if needed, copy and paste as new layer in center of tag.

Open DBS_Sleigh resize 50%, copy and paste as new layer over tube. Arrange that it looks like she

is laying inside the sleigh.

Open DBS_Candycane 03 resize 25%, copy and paste as new layer on the back end of sleigh

Open DBS_Candy01 resize 20%, copy and paste as new layer at the bottom near the end of the sleigh

Open DBS_Candy03 resize 10%, copy and paste as new layer a little to the right of candy01

Open DBS_Candle01 resize 30% copy and paste as new layer bottom, center of the sleigh.

Open DBS_Train, resize 20% copy and paste as new layer at the bottom left side, slightly over the candies.

Layers merge visible add credits and save. Add a Chrsimas saying with your text.

I added Candee Christmas text using

TheNautiGal font apply and place where you like it. Layers, convert to raster layer,

Effects, Plugins, Alienskin 5 Impact, gradient glow

the settings are as follows

under the basic tab check Oustide glow, check mask selection,

Glow radius 5.00, soften corners 35 Over opacity 100 Distortion amount 23 Distortion lump 55

gradient smoothness 100 all colors at the bottom white. Click ok, layers merge visible. SAVE as original.

Add your names and save as a different name such as candeechristmasDes (this way your original stays an original

and you dont say bad words when you realize you didnt save an original lol.

I hope this was easy to follow and you enjoyed it

Thank you for trying my tutorial!

xo Desert xo

PTU Poetic Expressions

This beautiful kit is called Poetic Expressions and was designed by Stina. It can be purchased at Twilight Scraps . I made this one before I decided to try and write tuts lol

My First Tutorial

So to break in this blog right off the bat, I thought I would write my first tutorial.

It is called Vintage Christmas. It is made with a beautiful kit from TootyPup.

So if you are ready, here we go!

I LOVE STEAMPUNK and I enjoyed using this Vintage Christmas kit, with so many beautiful elements that are

very easy to work with.

This tutorial was written by myself 11/19/11 for this blog, Desert's Place

Any resemblance to any other tutorials is purley concindental.

The kit I am using is PTU Vintage Christmas from Tooty Pup Scraps, you can purchase

it HERE

WCL Mask 84 which you can get HERE

tube is from unholy vault and was part of the christmas gift 2011 from PTE HERE

All dropshadow is V -2, H2, Opacity 29,Blur 2 except on the mask layer I did not use one.

Open new image 600x600 transparent box checked

Copy and paste paper 51 as new layer

layers, new mask layer, from the dropdown chose WSL84, source luminance checked

apply mask, merge group

Open TP_ChristmasWreath 2 and re size 60% copy and paste as new layer in center

Open TP_ChristmasCarol2 and re size 50%, paste and paste as new layer, rotate slightly left using the pick tool.

Open TP_clusterframe2 and re size 30% ,copy and paste as new layer over lower part of christmas carol2 and wreath

Click inside all the frame boxes with magic wand, selections, modify, expand 3

Copy TP_paper 51 and paste as new layer, selections, invert, and hit the delete button,

selections select none, drag paper layer under frame.

Open TP_ChristmasDeco 1and re size 40% ,copy and paste as new layer on right side of carol paper and wreath.

Open TP_SteampunkChristmas bar2 and re size 50%, copy and paste as new layer at top of carol paper rotate slightly left with

pick tool.

Open TP_ChristmasCarol7 and re size 20%, paste as new layer at lower right side over frame, rotate

slightly right with pick tool.

Open TP_ChristmasSteamheart1 and re size 50%, copy and paste as new layer middle right side.

Open TP_Christmasbar1 re size 50% , copy and paste as new layer, place top middle of frame

Add your tube, and credits, layers, merge visible and SAVE

I would love to see your results if you try my tutorials, you can send them to

me at desertgirl2020@yahoo.com

Thank you for trying my tut!

Welcome

Welcome to my blog. After several attempts to get one going I have finally decided to give it a fair shake. I am new to writing tutorials so if at anytime you see something that is questionable please contact me. I hope they are easy to follow and understand.

Special thanks goes to Alika of Alikas Scraps making for the beautiful lay out of this blog.